XPQ Static Var Generator 400V/690V - China Factory Suppliers for Reactive Power Compensation and Harmonic Control

Compensation capacity / Kvar

25

30

50

75

100

100

AC input

Rated voltage

400V(±15%)

690V (±15%)

Working frequency

(50±10%) Hz

Wiring method

3-phase 4-wire or 3-phase 3-wire

Technical Parameter

Filtering capability

≥97%;

Excess capacity is compensated at maximum capacity

Power consumption

≤3% of rated capacity

Module expansion capability

Up to 10 function modules

Switching frequency

20kHz

Circuit topology

Three-level

Compensation range

Inductive reactive power and capacitive reactive power can be continuously compensated

Filter level setting

Each harmonic can be individually set, and the ability to selectively eliminate specific harmonics (enhanced SVG) and ordinary SVG without filtering

Compensation range

Inductive reactive power, capacitive reactive power can be continuously compensated

Compensation range

The maximum inrush current

Not more than rated current

Response time

100μs/10ms

Protection function

Grid overvoltage, undervoltage, overcurrent, bus overvoltage, overheating and current limiting protection, etc., with a delay of 5μs

Display function

1. Each voltage and current value, current waveform display;
2. Total load current value, SVG output total current value display;
3. Operation mode setting, fault and runtime inquiry.

Communication Interface

RS232, RS485; WIFI and GPRS optional

Performance

Noise

＜65dB

Target power factor

-0.99 ~ 0.99 adjustable

Cooling method

Forced air cooling

Ambient temperature

-10℃ ~ +40℃

Storage temperature

-20℃ ~ +60℃

Humidity Maximum

Max 95%RH(non-condensing)

Altitude

Altitude ≤1500m, according to GB/T3859.2, the capacity decreases by 1% for every 100M increase

Protection grade

IP20 (other protection grades can be customized)

Mechanical characteristic

Color

Acrylic black;

other colors can be customized on request.

Operating characteristics

Operating safely and reliably 24/7 without disrupting the normal operation of other system equipment.

The module has protection measures such as overhumidity, overvoltage, undervoltage, overload and overcurrent, short circuit and system self-diagnosis function.

If a fault such as a short circuit occurs inside the module, it can protect itself without affecting the external power system.

If the compensation energy required by the load is greater than the rated compensation energy, it can be output according to the main body capacity and continue to compensate without overloading or causing equipment damage and exiting operation.