0102030405
High-Performance XFC550 VFD for Motor Control - 3 Phase 380V | China Suppliers & Factory
Features
4 Sets of Motor Control Parameters
The system is equipped with four sets of motor control parameters to accommodate four motors with varying process requirements and power segments. This addresses the issue of VFD backup and replacement at the project site. Parameters can be preset for each group, allowing seamless switching through the DI terminal during use without additional adjustments.
Flexible Port Configuration
Users have the flexibility to choose I/O expansion cards based on their specific digital and analog function requirements, offering convenience for design and debugging.
Rich Extensions
Supports the simultaneous application of two built-in expansion cards. One channel is for function and communication extensions (IO, PLC programmable, etc.), while the other is for encoder expansion cards (compatible with differential, OC interface encoder, resolver expansion cards, etc.).
High-performance Stall Control
High-performance over-current and over-voltage stall control effectively meets the varied load requirements of different mechanical characteristics, making it suitable for a wide range of engineering equipment applications.
Basic Parameters
| Item | Parameter | |
|---|---|---|
| Power supply | Rated supply voltage | 3 phase 380V ~ 480V |
| Allowed voltage fluctuations | -15％ ~ +10％ | |
| Rated supply frequency | 50/60Hz | |
| Allowed Frequency Fluctuations | ±5％ | |
| Output | Max output voltage | Three-phase 380V ~ 480V (Go after the input voltage) |
| Max Output frequency | 500Hz | |
| Carrier Frequency | 0.5 ~ 16kHz (automatic adjustment according to temperature) | |
| Overload capacity | 150% rated current 60s; 180% rated current 3s. | |
| Basic Functions | Frequency setting resolution | Digital setting: 0.01Hz Analog setting: max frequency * 0.025% |
| Control Mode | Open Loop Vector Control (SVC) Closed Loop Vector Control (FOC) V/f Control |
|
| Pull-in torque | 0.3Hz/150％ (SVC) 0 Hz/180% (FOC) |
|
| Speed range | 1 : 200 (SVC) 1 : 1000 (FOC) |
|
| Speed Stabilizing accuracy | ±0.5％ (SVC) ±0.02％ (FOC) |
|
| Torque Control Precision | ±5％ (FOC) | |
| Torque boost | Automatic torque boost; Manual torque increase 0.1% ~ 30.0% | |
| V/F Curve | Linear; Multi-point; N-th power V/F curve (n=1.2, 1.4, 1.6, 1.8, 2) | |
| Acceleration & deceleration curve | Linear or S-curve; 4 kinds of accel/decel time (0.0 ~ 6500.0s) | |
| DC braking | Braking frequency: 0.00Hz ~ max frequency Braking time: 0.0s ~ 36.0s Braking action current: 0.0% ~ 100.0% |
|
| Jogging control | Jog frequency range: 0.00Hz ~ 50.00Hz Jog accel/decel time: 0.0s ~ 6500.0s |
|
| Simple PLC, multi-stage speed | Up to 16-stage speed operation via built-in PLC or control terminal | |
| Built-in PID | Implementing closed-loop control in process control applications | |
| Overvoltage/overcurrent stall | Automatically limit current and voltage during operation to prevent fault shutdown | |
| Fast current limiting | Reduce overcurrent fault shutdown to ensure normal operation of the VFD | |
| Control interface | Digital input | 5 multi-function digital inputs (one supports max 100kHz pulse input) |
| Analog input | 2 analog inputs (both supporting 0 ~ 10V or 0 ~ 20mA, switchable via jumper) | |
| Digital output | 2 open-collector digital outputs (one supports max 100KHz square wave output) | |
| Analog output | 1 analog output (supporting 0 ~ 10V or 0 ~ 20mA, switchable via jumper) | |
| Relay output | 1-channel relay output (1 normally open contact, 1 normally closed contact) | |
| Standard communication | 1 channel RS485 communication interface | |
| Expansion interface | Function expansion interface | Connectable to IO expansion card, PLC programmable expansion card, etc. |
| Operation panel | LED digital display | 5-digit display of parameters and settings |
| Indicator light | 4 status indications, 3 unit indications | |
| Button’s Function | 5 function buttons including 1 multi-function button (set via parameter P0-00) | |
| Shuttle Knob | Add, minus and confirm | |
| Parameter copy | Fast upload and download parameters | |
| Protective function | Basic protection | Input/output phase loss, overvoltage, undervoltage, overheating, overload, overcurrent, short circuit, etc. |
| Environment | Operation condition | Indoor, no conductive dust and oil, etc. |
| Operating temperature | -10°C ~ +40°C (40°C ~ 50°C, derate 1.5% for every 1°C increase) | |
| Humidity | Less than 95% RH, no condensation | |
| Operating altitude | No derating below 1000m, derate by 1% for every 100m above 1000m | |
| Storage temperature | -20℃ ~ +60℃ | |
| Vibration | Less than 5.9m/s² (0.6g) | |
| Installation method | Wall-mounted or flush-mounted in the cabinet | |
| IP degree of protection | IP20 | |
Model Specifications
| Model | Motor Power (kW) | Rated Input Capacity (kVA) | Rated Input Current (A) | Rated Output Current (A) |
|---|---|---|---|---|
| XFC550-3P4-1k50G-BEN-20 | 1.5 | 3.2 | 4.8 | 4 |
| XFC550-3P4-2k20G-BEN-20 | 2.2 | 4.5 | 6.8 | 5.6 |
| XFC550-3P4-4k00G-BEN-20 | 4 | 7.9 | 12 | 9.7 |
| XFC550-3P4-5K50G-BEN-20 | 5.5 | 11 | 16 | 13 |
| XFC550-3P4-7K50G-BEN-20 | 7.5 | 14 | 21 | 17 |
| XFC550-3P4-11K0G-BEN-20 | 11 | 20 | 30 | 25 |
| XFC550-3P4-15K0G-BEN-20 | 15 | 27 | 41 | 33 |
| XFC550-3P4-18K5G-BEN-20 | 18.5 | 33 | 50 | 40 |
| XFC550-3P4-22K0G-BEN-20 | 22 | 38 | 57 | 45 |
| XFC550-3P4-30K0G-NEN-20 | 30 | 51 | 77 | 61 |
| XFC550-3P4-37K0G-NEN-20 | 37 | 62 | 94 | 74 |
| XFC550-3P4-45K0G-NEN-20 | 45 | 75 | 114 | 90 |
| XFC550-3P4-55K0G-NEN-20 | 55 | 91 | 138 | 109 |
| XFC550-3P4-75K0G-NEN-20 | 75 | 123 | 187 | 147 |
| XFC550-3P4-90K0G-NEN-20 | 90 | 147 | 223 | 176 |
| XFC550-3P4-110KG-NEN-20 | 110 | 179 | 271 | 211 |
| XFC550-3P4-132KG-NEN-20 | 132 | 167 | 253 | 253 |
| XFC550-3P4-160KG-NEN-20 | 160 | 201 | 306 | 303 |
| XFC550-3P4-185KG-NEN-20 | 185 | 233 | 353 | 350 |
| XFC550-3P4-200KG-NEN-20 | 200 | 250 | 380 | 378 |
| XFC550-3P4-220KG-NEN-20 | 220 | 275 | 418 | 416 |
| XFC550-3P4-250KG-NEN-20 | 250 | 312 | 474 | 467 |
| XFC550-3P4-280KG-NEN-20 | 280 | 350 | 531 | 522 |
| XFC550-3P4-315KG-NEN-20 | 315 | 393 | 597 | 588 |
| XFC550-3P4-355KG-NEN-20 | 355 | 441 | 669 | 659 |
| XFC550-3P4-400KG-NEN-20 | 400 | 489 | 743 | 732 |
| XFC550-3P4-450KG-NEN-20 | 450 | 550 | 835 | 822 |
Note: Please contact our sales staff for model selection of 500K and above.
Dimensions
Frame 1 (1.5kW - 2.2kW)
Frame 2 (4.0kW - 22kW)
Frame 3 (30kW - 160kW)
Frame 4 (185kW - 450kW)
| Model | W | H | D | w | h | h1 | d | t | Fixing Screws | Net Weight |
|---|---|---|---|---|---|---|---|---|---|---|
| XFC550-3P4-1K50G-BEN-20 | 110 | 228 | 177 | 75 | 219 | 200 | 172 | 1.5 | M5 | 2.5kg / 5.5lb |
| XFC550-3P4-2K20G-BEN-20 | ||||||||||
| XFC550-3P4-4K00G-BEN-20 | 140 | 268 | 185 | 100 | 259 | 240 | 180 | 1.5 | M5 | 3.2kg / 7.1lb |
| XFC550-3P4-5K50G-BEN-20 | 3.2kg / 7.1lb | |||||||||
| XFC550-3P4-7K50G-BEN-20 | 3.2kg / 7.1lb | |||||||||
| XFC550-3P4-11K0G-BEN-20 | 170 | 318 | 225 | 125 | 309 | 290 | 220 | 5kg / 11lb | ||
| XFC550-3P4-15K0G-BEN-20 | ||||||||||
| XFC550-3P4-18K5G-BEN-20 | 190 | 348 | 245 | 150 | 339 | 320 | 240 | 6kg / 13.2lb | ||
| XFC550-3P4-22K0G-BEN-20 | ||||||||||
| XFC550-3P4-30K0G-NEN-20 | 260 | 500 | 260 | 200 | 478 | 450 | 255 | 1.5 | M6 | 17kg / 37.5lb |
| XFC550-3P4-37K0G-NEN-20 | ||||||||||
| XFC550-3P4-45K0G-NEN-20 | 295 | 570 | 307 | 200 | 550 | 520 | 302 | 2 | M8 | 22kg / 48.5lb |
| XFC550-3P4-55K0G-NEN-20 | ||||||||||
| XFC550-3P4-75K0G-NEN-20 | 350 | 661 | 350 | 250 | 634 | 611 | 345 | 2 | M10 | 48kg / 105.8lb |
| XFC550-3P4-90K0G-NEN-20 | ||||||||||
| XFC550-3P4-110KG-NEN-20 | ||||||||||
| XFC550-3P4-132KG-NEN-20 | 450 | 850 | 355 | 300 | 824 | 800 | 350 | 2 | M10 | 91kg / 200.7lb |
| XFC550-3P4-160KG-NEN-20 |
| Model | W | H | D | w | h | h1 | h2 | d | W1 | Fixing Screws | Net Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|
| XFC550-3P4-185KG-NEN-20 | 340 | 1218 | 560 | 200 | 1150 | 1180 | 53 | 545 | 400 | M12 | 210kg / 463.1lb |
| XFC550-3P4-200KG-NEN-20 | |||||||||||
| XFC550-3P4-220KG-NEN-20 | |||||||||||
| XFC550-3P4-250KG-NEN-20 | |||||||||||
| XFC550-3P4-280KG-NEN-20 | |||||||||||
| XFC550-3P4-315KG-NEN-20 | 340 | 1445 | 560 | 200 | 1375 | 1410 | 56 | 545 | 400 | 245kg / 540.2lb | |
| XFC550-3P4-355KG-NEN-20 | |||||||||||
| XFC550-3P4-400KG-NEN-20 | |||||||||||
| XFC550-3P4-450KG-NEN-20 |
Accessories (Optional)
| Image | Expansion Type | Model No. | Function | Install Port | Install Qty |
|---|---|---|---|---|---|
 |
IO expansion card | XFC5-IOC-00 | 5 digital inputs, 1 analog input, 1 relay output, 1 open collector output, and 1 analog output can be added, with CAN interface. | X630 | 1 |
 |
Programmable expansion card | XFC5-PLC-00 | Connect with the VFD to form a PLC+VFD combination, compatible with Mitsubishi PLC programming environment. 5 digital inputs, 1 analog input, 2 relay outputs, 1 analog output, and RS485 interface. | X630 | 1 |
 |
Profibus-DP expansion card | XFC5-PFB-00 | Provides Profibus-DP communication protocol and supports baud rate adaptive function. Allows VFD to connect to Profibus network for real-time code reading and field bus control. | X630 | 1 |
 |
CANopen expansion card | XFC5-CAN-00 | Connects to high-speed CAN network for field bus control. Supports Heartbeat protocol, NMT messages, SDO messages, 3 TPDOs, 3 RPDOs, and emergency objects. | X630 | 1 |
 |
Ethercat expansion card | XFC5-ECT-00 | Provides Ethercat communication function, supporting Ethercat protocol for real-time reading of function codes and field bus control. | X630 | 1 |
Frequently Asked Questions
Q1: How does the XFC550 manage multiple motors with different requirements?
The XFC550 system is equipped with four sets of motor control parameters. This allows the drive to accommodate up to four motors with varying process requirements and power segments. You can preset the parameters for each group and switch seamlessly via the DI terminal, eliminating the need for manual adjustments during drive replacement.
Q2: What control modes are supported by the XFC550 series VFD?
The drive supports three primary control modes: Open Loop Vector Control (SVC), Closed Loop Vector Control (FOC), and standard V/f Control.
Q3: Can I install multiple expansion cards on the XFC550 drive?
Yes, the XFC550 series supports the simultaneous application of two built-in expansion cards. One slot is dedicated to function and communication extensions (such as I/O or programmable PLC cards), and the other slot accommodates encoder expansion cards (supporting differential, OC interface, resolver encoders, etc.).
Q4: What is the operating temperature range and environmental limit?
The normal operating ambient temperature range is -10°C to +40°C. It can operate up to +50°C if derated by 1.5% for every 1°C increase. The storage temperature range is -20°C to +60°C in non-condensing environments (humidity less than 95% RH).
Q5: Which fieldbus communication protocols are compatible with the optional expansion cards?
The XFC550 supports various fieldbus options via expansion cards, including Profibus-DP, CANopen, and Ethercat. These allow for real-time parameters reading and integration into centralized industrial control networks.
Q6: Does the XFC550 feature built-in protection against overcurrent and overvoltage?
Yes, it features high-performance over-current and over-voltage stall control as well as a fast current limiting function. These parameters automatically limit operating current and voltage to prevent frequent fault shutdowns and protect the system.