High-Performance XFC550 VFD for Motor Control, 3 Phase 380V - China Factory Suppliers
Features
The system is equipped with four sets of motor control parameters to accommodate four motors with varying process requirements and power segments. This feature addresses the issue of VFD backup and replacement at the project site. Parameters can be preset for each group, allowing for seamless switching through the DI terminal.
Users have the flexibility to choose I/O expansion cards based on their specific digital and analog function requirements, offering convenience for design and debugging.
The XFC550 series supports simultaneous application of two built-in expansion cards. One channel is for function and communication (IO, PLC, etc.), while the other is for encoder expansion (differential, OC interface, resolver, etc.).
High-performance over-current and over-voltage stall control effectively meets varied load requirements, allowing the motor to adapt to both hard and soft mechanical characteristics.
Basic Parameters
| Item | Parameter | |
|---|---|---|
| Power supply | Rated supply voltage | 3 phase 380V ~ 480V |
| Allowed voltage fluctuations | -15％~+10％ | |
| Rated supply frequency | 50/60Hz | |
| Allowed Frequency Fluctuations | ±5％ | |
| Output | Max output voltage | Three-phase 380V~480V (Go after the input voltage) |
| Max Output frequency | 500Hz | |
| Carrier Frequency | 0.5 ~ 16kHz (automatic adjustment) | |
| Overload capacity | 150% rated current 60s; 180% rated current 3s. | |
| Control Mode | Control Mode | SVC, FOC, V/f Control |
| Pull-in torque | 0.3Hz/150％ (SVC); 0 Hz/180% (FOC) | |
| Speed range | 1:200 (SVC); 1:1000 (FOC) | |
| Speed Stabilizing accuracy | ±0.5％ (SVC); ±0.02％ (FOC) | |
| Control Interface | Digital input | 5 multi-function inputs (one supports 100kHz pulse) |
| Analog input | 2 inputs (0~10V or 0~20mA) | |
| Communication | 1 channel RS485 interface | |
| Environment | IP degree | IP20 |
Model Specifications
| Model | Motor power / kW | Rated input / A | Rated output / A |
|---|---|---|---|
| XFC550-3P4-1k50G-BEN-20 | 1.5 | 4.8 | 4 |
| XFC550-3P4-2k20G-BEN-20 | 2.2 | 6.8 | 5.6 |
| XFC550-3P4-4k00G-BEN-20 | 4 | 12 | 9.7 |
| XFC550-3P4-7K50G-BEN-20 | 7.5 | 21 | 17 |
| XFC550-3P4-11K0G-BEN-20 | 11 | 30 | 25 |
| XFC550-3P4-22K0G-BEN-20 | 22 | 57 | 45 |
Note: Please contact our sales staff for model selection of 500K and above.
Dimensions
Accessories (Optional)
| Image | Expansion Type | Model No. | Function |
|---|---|---|---|
 |
IO card | XFC5-IOC-00 | Adds 5 DI, 1 AI, 1 Relay, 1 OC, 1 AO, with CAN interface. |
 |
PLC card | XFC5-PLC-00 | Compatible with Mitsubishi PLC environment; adds multiple IO and RS485. |
 |
Profibus-DP | XFC5-PFB-00 | Supports Profibus-DP protocol and baud rate adaptive function. |